A: All the installers work fully without any authorization for 14 days (TH1, TH1 Triode and now, BREVERB).
Q: Where can I find the FULLY WORKING Versions
A: The intallers below, once a computer is authorized (either with iLok or with license file), work as full installers/updaters for your product of choice.
Q: What kind of Copy Protection do you use?
A: Please note that Overloud products are copy protected with PACE technology. Therefore, Interlok drivers are required by our products to work (http://paceap.com/dldrvr.html). Interlok drivers are included with the installers. you can choose not to install them ONLY if you think you're running the risk of overwriting a newer installation of such drivers.
Q: How do I authorize?
A: Starting May 29th 2009, all of our products (TH1, BREVERB and TH1 Triode) can be authorized either with an iLok dongle OR with a license file, or even both at the same time on different computers. See the Install Manual for more information.
- FIX: Installers on Mac now always work properly. - FIX: Leds on amplifiers sometimes were not working properly. - FIX: Tremolo Intensity range is now correctly displayed (0 to 10). - FIX: fixed a bug leading to random crashes when closing a dialogue window. - FIX: fixed a bug that lead to a 'static' (stuttering due to continuous rettriggering) LFO behavior when some hosts were not in play. - FIX: both Internal and Variation BPM can be dragged to Smarts and 'tappable' both from the GUI and via MIDI. - FIX: now Spatial and Comb Delay are correctly recalled. - FIX: when saving a MIDI Binding, the saved preset is automatically selected in the preset display. - FIX: fixed a small bug in diode-based pedals (Tube Nine, Diode 250, etc...). - ENH: Module presets are now organized and browsed for in an alphabetic order. - ENH: optimizations in the Variation loading processes which should lead to a faster loading of the GUI when switching presets; the audio engine switching is seamless as before. - ENH: added a preference to limit editing (dragging and loading modules and double click to bypass...) in the Overview. - ENH: added a dialogue in the Browser when trying to overwrite a Variation, Sound or Bank. These operations when done in the Browser are always destructive. - ENH: added a preference to deactivate the above-mentioned Browser window dialogues. - ENH: Added credits for Recabinet and Wild Hades (Impulse Responses). - ENH: in Smart Connections window, when in Step mode, 'apply to all' arrows were added to ease the job.
- More than 100 new features - 2 new amps, 4 channels, 10 modes - 12 new modules: Expander Gate, 4 Delays, 1 Reverb, 2 Graphic EQs, Cabinet IR, 3 Flanger - full MIDI remote control with advanced implementations - Module Presets - and much... much more...
With the introduction of BREVERB 1.5.4, Overloud introduces a new authorization process, demo mode and license scheme.
BREVERB can now be authorized either with: - License ID + Serial number (old format - being phased out) - Serial number only (new format)
Please select the appropriate licensing option in the Authorization page based on the kind of BREVERB license you have ("Serial" or "Serial + License ID") - Each license can authorize ONE iLok and, additionally, up to THREE computers using a "license file".
See this How To Install document (originally for TH1, but it also works for BREVERB now). - Please make sure to select the appropriate authorization method, based on your preferences and on the type of serial number you have ("Serial" or "Serial + License ID)
Overloud BREVERB now runs in fully working demo-mode for 14 dayswithout requiring any additional authorization.
EXAMPLE BREVERB SERIALS: Serial + License ID: Serial number: BRVB110-00ABCD-00001AB License ID: 0123456A-12345678B-23456789C-34567890C
Serial only: BV00-0WFX-1A2B-1234
Breverb 1.5.8 is Mac OS X 10.6 Snow Leopard compatibe
-introduces the support for the new Serial-only format of serial numbers - now you can license one iLok AND up to 3 computers at the same time expanding the capabilities of your own license, even with the old Serial + License ID format (see Support - Authorize section for more info) - runs in fully-working demo mode without asking for authorization for 14 days.
Version 1.5.3 fixes a serious performance bug of version 1.5.2, that causes unpredictable glitches and freezes. UPGRADING TO VERSION 1.5.3 IS STRONGLY RECCOMENDED FOR EVERY 1.5.2 INSTALLATION.
Access to the Reserved Area
This is a reserved area for internal use. Access is restricted to Overloud members.
For allowed users: please login with the username and password provided by Overloud.